Showing posts with label Live sound applications. Show all posts
Showing posts with label Live sound applications. Show all posts

Friday, May 19, 2017

Mackie DL32R 32 Channel Wireless Digital Mixer

Last night I was out at a local bar and grill for the weekly Wednesday Night Jam. The bar is small but, it has a new Mackie DL32R Wireless Digital Mixer installed along with some Mackie SRM450 V3 Powered Loudspeakers installed too.

Last night the owner and my friend Steve, gave me his iPad and told me to have fun with the mix! I am an old school, analog sound guy but, I have been trying out mixing on digital mixers whenever I get a chance. I had never mixed on an iPad until yesterday. After I figured out where everything is located on the pad, I got reasonably comfortable with the process of mixing without a console in front of me.

Mackie has done a wonderful job of designing the Master Fader app for the iPad device! I only scratched the surface of the mixer but, I plan on going back again next week for the jam and perfect my technique!

I visited the Mackie web site to get more information on the Mackie DL32R mixer. I found a number of videos pertaining to the features and operations of the system.



















Here is an overall view of the system in this video along with well respected sound engineer, Martin Frey.
(Note: Double-click on the video to open up into full screen view)






Wednesday, September 14, 2016

DIY Press Mult - A Simple and Inexpensive Design

Here is an article written by Mike Sokol and how he created a DIY Press Mult from a few DI boxes and cables. The idea is genius! Read the following article to see how Mike Sokol came up with the design.

























Wednesday, March 23, 2016

Using Phase and Moving Around Stage Monitors To Remove Feedback

















When you are working with stage monitors and you get feedback, what is your first instinct to do?
Most of us go to our trusty graphic EQ for that monitor mix and pull out the offending frequency.

Another method to remove the problem is to actually move the stage monitor to a new location on stage to eliminate the feedback. It makes sense but, sometimes we forget to try the obvious tricks first.

Here is the link to a great article on this subject:

http://www.prosoundweb.com/article/moving_the_problem_out_of_the_way_using_phase_to_manage_feedback/P1/

This article is written by Peter Janis, president of Radial Engineering Ltd. Radial is a Canadian manufacturer of professional audio products. Direct boxes, snake systems and cabling, switchers, interfaces along with Tonebone guitar effects pedals and Primacoustic acoustical products for professional use.

For more details, check out the Radial Engineering Ltd. web site at the following link:

http://www.radialeng.com/


Happy Mixing!

Monday, December 7, 2015

Mixing Headworn Vocal Mic and Keyboard Through a Keyboard Amplifier

Recently, I was involved in mixing a show where a keyboardist wanted to mix his vocal mic and keyboard through a keyboard amp and send that feed to the FOH mix console. The keyboard amp was an Alto Kick 12 that featured 4 input channels and balanced stereo outputs. The vocal mic was plugged into input 1 via the XLR jack and the keyboard was plugged into input 2 via the 1/4" jack. It took a few minutes to set the balance of inputs on the keyboard amp and then set the output to the FOH console.




















During sound check the output level coming from the keyboard amp was too hot for the input on the mixer even with the channel gain set a minimum. Upon inspection of the keyboard amp I saw that the main output level was set to maximum and needed to be dialed back.


















Next I needed to get a proper balance between the vocal mic (a headworn type) and the keyboard itself. At first the sound was not good because, the keyboard amp had EFX turned on along with the EFX at the FOH console. So, I turned off all the EFX on the keyboard amp and used only the FOH mix EFX instead.

After some tweaking I got a reasonable blend of signal coming to the FOH mix. The biggest issue was keeping a good vocal / keys balance throughout the set. If only the performer would have let me take his mic feed direct to the FOH console and not through the keyboard amp, I would have had better control.

Then afterward, I got thinking about an alternate setup that I should have consider trying if I had more time between sets. If I had an XLR Y-cable, I could have taken the vocal mic feed, split it into two feeds, and sent one feed to the keyboard amp and one feed to the FOH mix. I wondered if that would have lessened the amount of signal sent to the FOH mix.

Then I wondered about using a mic splitter to split the channel properly to avoid any ground loops issues. Of course, Radial Engineering has just the solution that would work for that setup. It is the Radial JS-2 Mic Splitter. See the application drawing below:













Just like the diagram shows, the mic signal goes into the box and two outputs come out and go to the two mixers. It shows two FOH mixers but, it would work with the mixer keyboard amp too. With this setup the keyboardist could adjust his keyboard levels to way he likes and I would have independent feeds for the vocal mic and keyboard allowing me to achieve a better balanced mix at FOH.

Thursday, December 3, 2015

Road Map for Choosing The Correct DI Box by Radial Engineering













Radial Engineering has a really cool DI box selector called the Radial Road Map.
Click on the web link below to open the application, select which instrument you want to connect to a DI box and you will find a number of example hookups illustrated using Radial Engineering products.

http://www.radialeng.com/roadmap.php

Also check out the Radial "Intercom" newsletter available on the web site in PDF format. There are features on new Radial products along with some great articles and helpful tips.

http://www.radialeng.com/newsletters.php


Monday, November 23, 2015

Wiring The Stage Efficiently and Safely

Today, the feature article on Prosoundweb.com is all about wiring up the stage efficiently and safely. There are some excellent tips to help every sound technician when wiring the stage. Here is the link to the article on the web site:















Another great resource I found was a downloadable spec sheet on "Stage Zones" by Radial Engineering. They are a company that manufactures snake systems and cabling assemblies and custom patch solutions. Radial products featured in the document are the: Stage Flea, Stage Bug, and Stage Slug. These are various kinds of sub snake systems for cleaning up stage wiring. 
The document features a diagram showing how the stage can be divided up into "Zones" making the wiring the stage more efficient, clean and safe. Click here to go to the Radial Engineering web site and download the PDF document: